NUR 590 Benchmark – Evidence-Based Practice Project Proposal Final Paper

NUR 590 Benchmark – Evidence-Based Practice Project Proposal Final Paper

NUR 590 Benchmark – Evidence-Based Practice Project Proposal Final Paper

Click here to ORDER NOW FOR AN ORIGINAL PAPER ASSIGNMENT ON NUR 590 Benchmark – Evidence-Based Practice Project Proposal Final Paper

Assessment Description

For this assignment, you will synthesize the independent evidence-based practice project proposal assignments from NUR-550 and NUR-590 into a 4,500-5,000-word professional paper.

Final Paper

The final paper should:

  • Include all revisions and corrections suggested by your instructors.
    Combine the various elements of the overall project into a single paper. The synthesis should reflect the main concepts for each section and link ideas or concepts.
    Project Proposal Final Paper Essays NUR 590 Benchmark – Evidence-Based Practiceoverarching concepts, and should be rewritten to include the critical elements (do not copy and paste the assignments).
  • Contain supporting research for the evidence-based practice project proposal.

Main Body of the Paper

The main body of your paper should include the following sections:

Problem Statement

Organizational Culture and Readiness

Literature Review

Change Model, or Framework

Implementation Plan

Evaluation Plan

 

Also Read: NUR 550 Evidence-Based Practice Project Proposal Identification of Nursing Practice Problem Assignment

Click here to ORDER NOW FOR AN ORIGINAL PAPER ASSIGNMENT ON NUR 590 Benchmark – Evidence-Based Practice Project Proposal Final Paper

Appendices

The appendices at the end of your paper should include the following:

  1. All final changes or revisions to drafts that will be included in your paper’s appendices.
    Complete the “APA Writing Checklist” to ensure that your paper follows APA style and formatting guidelines as well as general academic writing guidelines. Include the completed checklist as the last appendix to your paper. You were directed to the Student Success Center for APA style assistance in each preceding course, and you submitted the APA Writing Checklist to demonstrate your adherence to APA style. This final paper should demonstrate a clear ability to communicate your project in a professional and correctly formatted APA paper. Final Paper for NUR 590 Benchmark – Evidence-Based Practice Project Proposal

General Requirements

You are required to cite 10-12 peer-reviewed sources to complete this assignment. Sources must be published within the last 5 years and appropriate for the assignment criteria and nursing content.

Prepare this assignment according to the guidelines found in the APA Style Guide, located in the Student Success Center. NUR 590 Benchmark – Evidence-Based Practice Project Proposal Final Paper

This assignment uses a rubric. Please review the rubric prior to beginning the assignment to become familiar with the expectations for successful completion. NUR 590 Benchmark – Evidence-Based Practice Project Proposal Final Paper Essays

You are required to submit this assignment to LopesWrite. A link to the LopesWrite technical support articles is located in Class Resources if you need assistance.

Translating Evidence Into Practice Through Knowledge Implementation

Read “Translating Evidence Into Practice Through Knowledge Implementation,” by Campione, Wampler-Kuhn, and Fisher, from Rehab

… 


Evidence-Based Practice in Nursing and Healthcare: A Guide to Best Practice

Read “Making Connections: An EBP Exemplar” in Unit 6 in Evidence-Based Practice in Nursing and Healthcare: A Guide t

… 


Translating Evidence Into Practice: How Advanced Practice RNs Can Guide Nurses in Challenging Established Practice to Arrive at Best Practice

Read “Translating Evidence Into Practice: How Advanced Practice RNs Can Guide Nurses in Challenging Established Practice to Arrive at

… 


Advanced Nursing Research: From Theory to Practice

Read Chapter 25 in Advanced Nursing Research: From Theory to Practice.

NUR 590 Topic 4 DQ 2

Identify which statistical test you would use in conjunction with your selected research design from DQ 1 to evaluate the outcomes for your evidence-based project proposal and explain why you selected this test. What kind of information will this test provide about your outcomes?

According to Parab & Bhalerao, “statistical tests are mathematical tools for analyzing quantitative data generated in a research study” (2010). There are a number or test that researchers can use which can also become overwhelming and cause confusion for the research, and that can lead to sabotaging and tainting their study. Selecting the statistical test helps the researcher understand what to look for in the study as well as help organize their data. Parab & Bhalerao (2010) stated that “Before selecting a statistical test, a researcher has to simply answer the following six questions, which will lead to correct choice of test:”.

  1. How many independent variables covary (vary in the same time period) with the dependent variable?
  2. At what level of measurement is the independent variable?
  3. What is the level of measurement of the dependent variable?
  4. Are the observations independent or dependent?
  5. Do the comparisons involve populations to populations, a sample to a population, or are two or more

samples compared?

  1. Is the hypothesis being tested comparative or relationship?

 

Statistical testing is used explain the results of a study. The test that I would use would be the t-test. “A t-test is a type of inferential statistic used to determine if there is a significant difference between the means of two groups, which may be related in certain features” (Investopedia, n.d.). I would used this test because of show the averages of nurses to patient ratios to help determine the correlation between low staffing and high staffing and whether each has a positive or negative effect on patient health outcomes.

 

 

 

Reference:

 

Investopedia. (n.d.). T-Test. Retrieved from https://www.investopedia.com/terms/t/t-test.asp

 

Parab, S. & Bhalerao, S. (2010). Choosing Statistical Test. International Journal of Ayurveda Research. 1(3): 187-191. Retrieved from https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2996580/

Statistical tests can be chosen based on independent factors and other project designs. My project seeks to identify if PPE education increases informal (family) caregiver compliance to PPE usage. I’ve identified at least one confounding variable, which is the effects of PPE usage modeling by staff. Siebert et al. (2018) found staff modeling and teaching was a big part of compliance of visitors. However, there is a test which accounts for differences in participants.

I am choosing a mixed design ANOVA test due to the used of different participants in each group. A mixed design measures “change over time, differences between the groups, interaction of time and group effects”  (Tappen, 2016). This will show the differences between groups (education versus no education) and within the groups themselves.  It can be used to measure the change between before and after the intervention of education. It will help control for the different participants in each intervention group. It could measure the change from several different time points, as desired.

 

Seibert, G., Ewers, T., Barker, A. K., Slavick, A., Wright, M. O., Stevens, L., & Safdar, N. (2018). What do visitors know and how do they feel about contact precautions? American Journal of Infection. 46(1): 115–117.

 

Tappen, R. (2016). Advanced Nursing Research. Jones & Bartlett.

It is important to choose the correct statistical test when conducting research, as research should maintain validity. To correctly perform the statistical analysis of quantitative data, two key points should be considered: One is to identify the type of experimental design correctly, and the other is to check whether data meets the preconditions of the parameter test (Liang & Wang, 2019. If these are not considered, it can cause misuse of data and can possibly conclude false conclusions. I believed that the Paired T- Test would best fit my project proposal. The Paired T-Test tests the difference between two variables with the same population. For example pre and post test scores. This would allow the comparison of performance before and after the completion of the organizational change implementation. Determining the amount of hands off time during cardiopulmonary resuscitation would be the first variable, while the data obtained for hands off time during CPR with implementation of continuous compressions during defibrillation would be the second variable. Comparing these two variables should produce the conclusion that continuous compressions during hands on defibrillation decreases hands off time during CPR and increase patient outcomes. Ultimately this test would determine the amount of “hands-off” during CPR comparing standard CPR and continuous compressions during defibrillation.

Liang, G., Fu, W., & Wang, K. (2019). Analysis of t-test misuses and SPSS operations in medical research papers. Burns & trauma7.

Quantitative data come from measurements that yield data in numeric form ranging from binary to continuous numeric expressions(Polit, 2017).The statistical test that I would use is a paired T-test. This is a type of Parametric test which is applied when data is normally distributed not skewed (Najmi et al., 2021). The data should be normally distributed and quantitative. This is appropriate for my project which is a quantitative design. The paired T-test is used when one group serves as its own control group. It is used to compare the two means and is used in small samples(Najmi et al., 2021). My project is to reduce CAUTI rates by using patient/family engagement and empowerment. I would use a T-test to compare pre and post intervention CAUTI rates to determine if the intervention was successful in reducing incidence.

Najmi, A., Sadasivam, B., & Ray, A.(2021). How to choose and interpret a statistical test? An update for budding researchers. Journal of Family Medicine and Primary Care, 10(8), 2763-2767. https://doi-org.lopes.idm.oclc.org/10.4103/jfmpc.jfpc-433-21

 

Pilot, D.F.(2017). Data collection methods. J. Fitzpatrick(ed.), Encyclopedia of nursing research (4th ed.). Springer Publishing Company.

Using statistical data analysis can be used in many ways and be of benefit in not only the business world, but in the healthcare world as well, especially research. One would need to understand what statistical methods are and the principles behind them to be able to analyze or correctly interpret the data that comes from the results (Wienclaw, 2021). The statistical test that I would use in the evidence-based practice (EBP) project proposal to evaluate the outcomes would be that of regression analysis. This is considered a reliable method of being able to identify which variables have an impact on the outcome of the topic of interest. There are different types of regression analysis that can be used in which one type is linear regression.

Linear regression analysis would be the specific statistical test that I would use for my project. The reason why I selected this test was because I want to determine what impact my independent variables (education and no education) have on the outcome of my dependent variable (cervical cancer screening rates). Linear regression analysis statistical test is used to “estimate the association of greater than or equal to 1 independent (predictor) variables with a continuous dependent variable” (Schober & Vetter, 2021, p. 108). The kind of information that this test will provide about my outcomes on my project would be an estimate of the effect of my independent variables (education and no education) on my dependent variable (cervical cancer screening rates). This will help determine the impact of education versus no education on the increasing cervical cancer screening rates in my population of ethnic minority women. The use of linear regression analysis can also provide me with information on the interaction of my two independent variables and whether the effect of one depends on the value of the other (Schober & Vetter, 2021).

Reference:

Schober, P., & Vetter, T. R. (2021). Linear regression in medical research. Anesthesia & Analgesia, 132(1), 108-109. https://doi.org/10.1213/ANE.0000000000005206

 

Wienclaw, R. A. (2021). Statistics and data analysis. Salem Press Encyclopedia. https://lopes.idm.oclc.org/login?url=https://search.ebscohost.com/login.aspx?direct=true&db=ers&AN=89163982&site=eds-live&scope=site&custid=s8333196&groupid=main&profile=eds1